1/6 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.11 - rev.b chip resistor networks mnr series < automotive > ? features 1) can be mounted even more dens ely than chip resistors. 2) mounting cost can be reduced by less frequency of mounting times. 3) convex electrodes secures visual in spection of fillets after soldering. 4) rohm resistors have obtained is o9001 / iso / ts16949 certification. 5) "automotive" product is aec-q200 compliant. ?please contact us for status of aec-q200 on "general purpose" products. part no. packing specification quantity / reel type code no. of terminals no. of elements general purpose paper tape (2mm pitch) paper tape (4mm pitch) embossed tape (4mm pitch) 1005 4 1608 2 1608 4 1608 5 1605 8 3216 2 3216 4 3216 5 mrap 10,000 5,000 4,000 erap erap errp erap m0ap m0ap e0ap e0ap e0rp e0ap j0ab j5ab j5r mnr04 mnr12 mnr14 mnr15 mnr18 mnr32 mnr34 mnr35 automotive ?corresponds to aec?q200 1005 2 0402 4 0402 2 0603 2 0603 4 0603 5 0602 8 1206 2 1206 4 1206 5 8 42 8 10 16 4 8 10 4 4 4 8 8 2 4 8 2 mrap MNR02 (mm) size (inch) ? part number description mnr (chip resistor networks) resistance code, 3 or 4 digits. 000 denotes jumper type. ex.) 1 = 1r0 ( 5% ) 9.1 = 9r1 ( 5% ) 10 = 10r0 ( 1% ) 100 ( 5% ) 1m = 1004 ( 1% ) 105 ( 5% ) 02 (1005 [0402] 2) 04 (1005 [0402] 4) 12 (1608 [0603] 2) 14 (1608 [0603] 4) 15 (1608 [0603] 5) 18 (1605 [0602] 8) 32 (3216 [1206] 2) 34 (3216 [1206] 4) 35 (3216 [1206] 5) f ( 1% ) j ( 5% ) (including jumper type) part no. size (mm [inch]) resistance tolerance nominal resistance type code 0 2 ma p 0 n mr j0 1 5 f j : : 4 digits 3 digits resistance tolerance resistance code
2/6 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.11 - rev.b data sheet mnr series < automotive > ? products list MNR02 m0ap mnr04 m0ap 25 jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m / imax. = 1a (element) jumper type : rmax = 50m x / imax. = 2a (element) jumper type : rmax = 50m / imax. = 2a (element) j(5%) 25 50 50 12.5 25 200 200 50 100 400 400 ? ? ? ? 50 ? e0ap e0ap e0rp e0ap j0ab j5ab j5r mnr12 mnr14 mnr15 mnr18 mnr32 mnr34 mnr35 +500/?250 200 1 to 9.1 10 to 1m j(5%) f(1%) j(5%) f(1%) j(5%) j(5%) j(5%) j(5%) j(5%) ?55 to +155 ?55 to +125 e24 100 200 500 10 to 1m 10 to 1m e24 e6 e24 e24 e24 e24 e24 e12 200 200 56 to 100k 10 to 1m 10 to 1m 200 200 10 to 1m 56 to 100k 200 100 200 2.2 to 6.8 10 to 1m 10 to 1m 200 j( 5%) 10 to 1m e24 limiting element voltage (v) maximum overload voltage (v) temperature coefficient (ppm / c ) resistance tolerance (%) operating temperature range ( c ) type code resistance range series part no. 0.063 / element 0.063 / element 0.063 / element 0.063 / element 0.031 / element 0.063 / element 0.125 / element 0.125 / element 0.063 / element rated power (70 c) (w) ?design and specifications are subject to change without notice. carefully check the specification sheet supplied with the product before using or ordering it. ? circuit construction MNR02 / 12 / 32 mnr04 / 14 / 34 mnr15 / 35 mnr18 r1 r1 r2 r3 r1 r2 r3 r4 r5 r6 r7 r8 r2r1 r3 r4 r5 r6 r7 r8 r4 r2 r1=r2=r3=r4 r1=r2 r1=r2=r3=r4=r5=r6=r7=r8 r1=r2=r3=r4=r5=r6=r7=r8
3/6 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.11 - rev.b data sheet mnr series < automotive > MNR02 / 12 / 32 mnr04 / 14 / 34 mnr15 / 35 mnr18 b e b eb b d p1 p2 p1 p1 p1 p2 p2 c a c d c a c d c a c d c a c p2p1 b p1 land r103 l a a a a a a a a a a p l l pp l p t t t t w w ww c c c w c c t b2 b2 b2 b1 b1 b2 b1 103 103 l p b2 b1 MNR02 / 12 / 32 mnr04 / 14 / 34 mnr15 mnr18 mnr35 ? chip resistor dimensions and markings there are three digits used for the calculation number according to iec code and ?r?is used for the decimal point. mnr35 is ? r ? + three digits used for the calculation number according to iec code. part no. type code (mm) l w t a b1 b2 c p (unit : mm) MNR02 m0ap 1005 2 1.0 0.1 1.0 0.1 0.35 0.1 0.20.1 ? no m0ap 1005 4 2.0 0.2 1.0 0.1 0.35 0.1 0.2 0.1 0.30.1 no e0ap 1608 2 1.6 0.1 1.6 0.1 0.5 0.1 0.30.2 yes e0ap 1608 4 3.2 0.1 1.6 0.1 0.5 0.1 0.3 0.2 0.40.15 yes e0ap 1608 5 3.2 0.1 1.6 0.1 0.5 0.1 0.3 0.1 0.320.15 yes j5ab 1605 8 3.8 0.1 1.6 0.1 0.45 0.1 0.3 0.2 0.30.1 no e0rp 3216 2 2.6 0.2 3.1 0.2 0.55 0.1 0.50.3 ? yes e0ap 3216 4 5.2 0.4 3.1 0.2 0.55 0.1 0.5 0.3 0.80.2 yes mnr35 j5r 3216 5 6.4 0.4 3.1 0.2 0.55 0.1 0.5 0.3 0.80.2 yes ? 0.33 +0.1 0 0.40.1 0.60.15 0.480.15 0.30.1 1.00.2 1.00.2 1.00.2 0.60.15 0.68 0.5 0.8 0.64 0.5 1.27 1.27 1.27 0.8 0.250.1 0.250.1 0.250.15 0.30.1 0.30.2 0.5max 0.5max 0.5max 0.250.15 (inch) 0402 2 0402 4 0603 2 0603 4 0603 5 0602 8 1206 2 1206 4 1206 5 marking existence ? including jumper type mnr04 mnr12 mnr14 mnr15 mnr18 mnr32 mnr34 ? land pattern example dimensions part no. type code a MNR02 mnr04 mnr12 mnr14 mnr15 mnr18 mnr32 mnr34 mnr35 0.5 0.5 1.0 1.0 1.0 1.0 2.1 2.1 2.1 b 0.35 to 0.4 0.4 0.4 to 0.6 0.4 to 0.6 0.48 0.3 0.8 to 1.0 0.8 to 1.0 0.8 to 1.0 c 0.5 0.5 0.7 to 0.8 0.7 to 0.8 0.7 to 0.8 0.7 to 0.8 0.8 to 1.0 0.8 to 1.0 0.8 to 1.0 p2 ? 0.5 to 0.55 ? 0.8 to 0.9 0.72 ? ? 1.27 to 1.45 1.27 to 1.4 d 1.5 1.5 2.4 to 2.6 2.4 to 2.6 2.4 to 2.6 2.4 to 2.6 3.7 to 4.1 3.7 to 4.1 3.7 to 4.1 e ? 0.3 ? 0.4 0.32 ? ? 0.7 to 0.8 0.7 to 0.8 p1 0.65 to 0.7 0.5 0.8 to 1.0 0.8 0.64 0.5 1.27 to 1.6 1.27 to 1.35 1.27 to 1.3 (unit : mm) m0ap m0ap e0ap e0ap e0rp e0ap j0ab j5ab j5r
4/6 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.11 - rev.b data sheet mnr series < automotive > (2.0%+0.1) max. 50m (1.0%+0.05) (1.0%+0.1)tmnr35 (3.0%+0.1) max. 50m max. 100m 20 c compliance standard(s) : iec60115? 8 jisc 5201? 8 measurement : +20 / ?55 / +20 / +125c (3.0%+0.1) (3.0%+0.1) (1.0%+0.05) (1.0%+0.1)tmnr35 (1.0%+0.1)tmnr35 (1.0%+0.05) (1.0%+0.05) max. 100m max. 100m max. 50m max. 50m max. 50m ? rosinethanol : 25% (weight) soldering condition : 2355 c duration of immersion : 2.00.5s rated voltage (current) 2.5, 2s. maximum overload voltage resistor type jumper type resistance variation of resistance with temperature solderability damp heat, steady state endurance at 70c endurance rapid change of temperature bend strength of the end face plating resistance to solvent resistance to soldering heat overload test items guaranteed value test conditions see "products list" see "products list" soldering condition : 2605 c duration of immersion : 101s test temp. : ?55 c to +125 c 5cycle 40c, 93%rh (relative humidity) test time : 1,000h to 1,048h 70c rated voltage (current) 1.5h : on ? 0.5h : off test time : 1,000h to 1,048h 125c (mnr15 / 18 / 32 / 34 / 35) 155c (MNR02 / 04 / 12 / 14) test time : 1,000h to 1,048h 235 c , immersion cleaning, 50.5min solvent : 2?propanol a new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. no remarkable abnormality on the appearance. without mechanical damage such as breaks. ? derating curve when the ambient temperature ex ceeds 70c, power dissipation must be adjust ed according to the derating curves below. MNR02 / 04 / 12 / 14 0 20 40 60 80 100 ?55 0 70 100 155 ambient temperature ( c) percent rated power (%) ? characteristics ? chip weight (typical value) MNR02 m0ap mnr04 m0ap mnr12 e0ap mnr14 e0ap mnr15 e0rp mnr18 e0ap mnr32 j0ab mnr34 j5ab mnr35 j5r mg/pc 1.04 2.22 4.04 7.55 7.41 8.90 15.9 31.2 38.4 parameter unit weight mnr15 / 18 / 32 / 34 / 35 0 20 40 60 80 100 ?55 0 70 100 125 ambient temperature (c) percent rated power (%)
5/6 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.11 - rev.b data sheet mnr series < automotive > ? tape dimensions a 0 p 1 p 0 p 2 b 0 f w k e d 0 ?? paper tape ?? embossed tape 1.17 0.1 1.170.1 1.2 0.1 2.20.1 1.8 0.1 1.80.1 1.8 0.1 3.40.1 1.8 0.1 3.40.1 1.95 0.15 4.10.15 wf ea 0 b 0 8.0 0.3 3.5 0.05 1.750.1 8.0 0.3 3.5 0.05 1.750.1 8.0 0.3 3.5 0.05 1.750.1 8.0 0.3 3.5 0.05 1.750.1 8.0 0.3 3.5 0.05 1.750.1 8.0 0.3 3.5 0.05 1.750.1 1.5 +0.1 0 1.5 +0.1 0 1.5 +0.1 0 1.5 +0.1 0 1.5 +0.1 0 1.5 +0.1 0 2.0 0.05 max 0.5 2.0 0.05 max 1.1 2.00.05 2.00.05 2.00.05 2.00.05 max 1.1 max 1.1 max 1.1 max 1.1 d 0 p 0 p 1 p 2 t 2 4.00.1 4.00.1 4.00.1 4.00.1 4.00.1 4.00.1 2.00.1 2.00.1 4.00.1 4.00.1 4.00.1 4.00.1 3.0 0.1 3.50.1 3.4 0.1 5.60.1 3.4 0.1 6.60.1 wf ea 0 b 0 8.0 0.3 3.5 0.05 1.750.1 12.0 0.3 5.5 0.05 1.750.1 12.0 0.3 5.5 0.05 1.750.1 1.5 +0.1 0 1.5 +0.1 0 2.0 0.05 0.90.1 2.0 0.05 1.00.15 2.0 0.05 1.00.15 d 0 p 0 p 1 p 2 k j0ab j5ab j5r 4.00.1 4.00.1 4.00.1 4.00.1 4.00.1 4.00.1 MNR02 mnr04 mnr12 mnr14 mnr15 mnr18 m0ap m0ap e0ap e0ap e0rp e0ap MNR02 mnr04 mnr12 mnr14 mnr15 mnr18 m0ap m0ap e0ap e0ap e0rp e0ap mnr32 mnr34 mnr35 j0ab j5ab j5r mnr32 mnr34 mnr35 1.5 +0.1 0 type code part no. (unit : mm ) type code part no. (unit : mm ) type code part no. type code part no. t 2 a 0 b 0 base paper (bottom tape) components cavity top tape e f w p 0 p 2 p 1 d 0
6/6 www.rohm.com c 2012 rohm co., ltd. all rights reserved. 2012.11 - rev.b data sheet mnr series < automotive > ? reel dimensions using two kinds of reels for taping. ( ? mnr34/35 applies fig. 1 only.) j fig.1 j fig.2 abcd 130.2 60 +1.0 0 MNR02 m0ap mnr04 m0ap mnr12 e0ap mnr14 e0ap mnr15 e0rp mnr18 e0ap mnr32 j0ab mnr34 j5ab mnr35 j5r 13 +1.0 0 9 +1.0 0 0 2 0 4 0 6 0 8 0 2 0 4 0 6 0 8 c abd c ab d 180 0 ?1.5 according to eiaj et-7200b (rrv ) according to eiaj et-7200b (rrm ) label label (unit : mm ) type code part no.
r1120a www.rohm.com ? 2012 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specified herein is subject to change for improvement without notice. the content specified herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specifications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when design ing circuits for mass production. great care was taken in ensuring the accuracy of the information specified in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the produc ts. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specified in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any product, such as derating, redundancy, fire control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specified herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
